| Product Options: |
|
| 1) Length of tunnel required: |
|
2a) 20mm x 9m Anti Hotspot Tape : 
 |
Anti hotspot Tape is an adhesive tape which is stuck to the tube and helps to increase the life of the Polythene cover by protecting it from the tube in hot weather. |
|
|
3) Hinged Door Kit 6' x 4':
 |
A kit to make a 6' x 4' timber door using 2" x 2" tanalised timber, and includes hinges screws and a bolt |
|
|
4) Crop Bars 12'/ 14' Tunnel:
 |
Crop Bars are fitted across the hoops, used to support crops, or can be used for hanging baskets, and will give up to 20% extra strength to the Polytunnel. |
|
|
5) Timber Base Rail kit 12' Tunnel:
 |
A Timber Rail (3" x 2" timber) fitted around the base of the Polytunnel to which the Polythene is attached when it is decided not to trench it in. Advantage is that you can tighten the Polythene after fitting by sliding the rail down slightly. You will need to buy Anchor Plates to hold the Foundation tubes in the ground or concrete them in place. |
|
|
6) Anchor Plates:
 |
These are fitted to the Foundation tubes when using a Timber Base rail. They come complete with clamps for fitting. You do not require these if you decide to concrete in the Foundation Tubes. |
|
|
7) Ground Sockets:
 |
Ground Sockets are used where you wish to fix your Polytunnel to a concrete base. You need to ensure that the concrete is thick, and sound enough to be sure of a secure fixing. These are used in place of the foundation tubes and come with fixing bolts. |
|
|
8) Side Vent Kit 12'/14':
 |
Side Vent Kit for one side only, is supplied with timber and clamps for a 'mid rail' to which the Polythene cover is attached, and ventilation net for attaching to the mid rail and trenching in to the ground. You may wish to make up your own roll up polythene to close the side, in colder weather.You will need to, either concrete in the foundation tubes, or fit Ground Anchors if fitting ventilation netting to one or both sides. |
|
|
9) Overhead Irrigation:
 |
The use of a hosepipe can lead to irregular watering. An overhead system in your Polytunnel can save you time, and your plants. We use a 20mm polyethylene pipe, swivel sprayers with antimist and weighted drop pipe. Each kit comes with tap and hose connection. |
|
|
| |
PRICE: £339.00 |
Hoop spacing: 5’
Frame tube size: 1” (25.4mm)
Foundation tube size: 1¼” (31.75mm) x 2’ 6” (760mm)
Hoop and ridge joiners: sleeve fit purpose made connectors
Horizontal brace bars with patent no bolt connectors
Door frame: To make a 6’ high x 4’ wide opening, in treated softwood
Timber pack forms door frames at each end ready for customer assembly
Roll up door blinds supplied as standard, hinged door kit available
|
