Home About us Information Customer Services Terms & Privacy spacer Contact us
   
Home > Value Polytunnels 8' wide x 10' and 10' wide x 15' > > 8' x 10' Value Polytunnel

8' x 10' Value Polytunnel 8' x 10' Value Polytunnel
8'(2.1m) x 10'(3m) Easy to assemble Polytunnel made with 1" pregalvanised tube 6'high x 4' wide (treated timber) door frames, 1 Hinged Door, 1 Roll-up vent Door, Sunmaster Diffused Polythene, Anti Hotspot Tape, Roll of Repair Tape and full assembly instructions

NORMAL PRICE £305.50
 

Product Options:  
2. Timber Base Rail kit :   
A Timber Rail (3" x 2" timber) fitted around the base of the Polytunnel to which the Polythene is attached when it is decided not to trench it in. Advantage is that you can tighten the Polythene after fitting by sliding the rail down slightly. You will need to buy Anchor Plates to hold the Foundation tubes in the ground or concrete them in place.
 
3. Anchor Plates:   
These are fitted to the Foundation tubes when using a Timber Base rail. They come complete with clamps for fitting. You do not require these if you decide to concrete in the Foundation Tubes.
 
4. Ground Sockets:   
Ground Sockets are used where you wish to fix your Polytunnel to a concrete base. You need to ensure that the concrete is thick, and sound enough to be sure of a secure fixing. These are used in place of the foundation tubes and come with fixing bolts.
 
  PRICE: £280.00
Hoop spacing: 5’
Frame tube size: 1” (25.4mm)
Foundation tube size: 1¼” (31.75mm) x 2’ 6” (760mm)
Hoop and ridge joiners: sleeve fit purpose made connectors
Horizontal brace bars with patent no bolt connectors
Door frame: 6’ high x 4’ wide in treated softwood
Timber pack forms door frames at each end ready for customer assembly
Roll up door blind, and hinged door kit supplied
back  

   
Copyright © 2008 www.ferryman-polytunnels.co.uk   |   Designed & hosted by PC Webshop Ltd - Somserset Website Design and Hosting   |   Practical Info   |   Sitemap